Manto  RPF  68C

Vacuum pump oil, suitable for rotary vane pumps, vacuum degree up to 1.0*10-2 mbar or less, good oil-water separation

Manto  RPF  46/68/100E

Vacuum pump oil, made of highly refined base oil distillation, viscosity 46/68/100.

Vacuum degree up to 3*10-3 mbar or less, suitable for rotary vane pumps such as Leybold, Eduards, Busch, ULVAC, etc.

Manto  DPF  JQ

Diffusion pump oil, preferably produced by rectification of synthetic base oils. For high vacuum systems. The latent heat of evaporation is small,

The working temperature is 180-235°C, which can reduce power consumption. The ultimate vacuum reaches below 5*10-8torr.

Manto  DPF  W1

Diffusion pump oil, preferably produced by rectification of synthetic base oils. For high vacuum systems. The latent heat of evaporation is small,

The working temperature is 170-210°C, which can reduce power consumption. The ultimate vacuum reaches below 5*10-7torr.

Manto  DPF  W2

Diffusion pump oil, silicone oil. For high vacuum systems. Good heat resistance, suitable for all kinds of domestic diffusion pumps.

The ultimate vacuum reaches below 5*10-7torr.

Manto  Maxgrease  Alpha F

This series of products is based on fully saturated fluorine oil, and its thermal stability can reach 250°C. It is widely used in high-temperature occasions such as various bearings.

Manto  Alphagrease  Plex

This series of products uses PAO as the base oil, and its thermal stability can reach 180°C. It is widely used in high-temperature occasions such as various bearings.

Manto  Super  Screw

This series of products is long-term oil-cooled air compressor oil, and the RBOT value can reach 2000h.

Manto  Super  Hydro  A

This series of products is non-zinc hydraulic oil with super long life, suitable for occasions requiring high actuation precision.

Manto  Flush  SF

This product has a very good cleaning effect on the sludge generated by the hydraulic gear system.

Manto  Cleaner  LD

Suitable for cleaning metal stamping parts, CNC cutting parts, precision metal parts, electronics, home appliances, measuring instruments, molds, bearings, foaming and other products of various materials.

Manto  MaxGear  Alpha

This series of products is based on PAO synthetic gear oil, which can provide excellent protection for equipment under severe working conditions.

Manto  Alpha  Winforce    320M

This product is based on mPAO and is suitable for wind turbines and other industrial gearboxes where anti-pitting is required.

Manto  Alpha  Winforce  320V

This product is based on mPAO and is suitable for wind turbines and other industrial gearboxes where anti-pitting is required.

Manto  Bios  Winforce 320

The product is based on plant-based raw materials and is suitable for applications such as offshore wind turbines that require environmental degradation.

Manto  Alpha  Wingrease

This series of products uses PAO as the base oil, and its thermal stability can reach 180°C. It is used in wind turbines.

Manto  Alpha  Hydro  32HF

The product uses point PAO as the base oil and is suitable for applications such as wind turbines with large temperature differences between day and night.

Manto  Manlube  Chaincare

This series of products are formulated with ester base oil, with low evaporation loss, excellent thermal stability and very little sludge generation. It is suitable for artificial boards, sizing machines, etc.

Manto  Hydrax  SHV15/32

Ultra-high viscosity refers to ashless hydraulic oil, suitable for low-temperature light field requiring high-precision actuation system

Manto  Hydrax  HV46

Ashless anti-wear hydraulic oil, formulated with GTL base oil, suitable for high pressure and high temperature hydraulic systems

Manto  Alpha  Grease PG

Environment-friendly wide temperature lubricating grease, -50-120℃, suitable for worm gears and other mechanisms.